The system of External Fixator for Wrist and Forearm has sliding set, clamp, ball joint, lightweight design, upper locking bolt. Meanwhile, it can be used in fixing fractures of distal radius.
Round External Fixator is for the treatment of non-union or pseudoarthrosis of long bones and correction of bone or soft tissue defects or deformities.
The design of Round External Fixation System is stable, versatile and simple, and it could be used for limb lengthening by metaphyseal or epiphyseal distractions, fixation of open and closed fractures, treatment of non-unions or pseudoarthrosis of long bones as well as correction of bone or soft tissue defects or deformities and so on.
The design of the external fixed modular rod system has different clamps for clinical selection, pin clamps, pin-to-rod connections, cortical screws, cancellous bone screws and carbon fiber rods. At the same time, it can be used for rapid, initial fixation, periarticular fractures, severe comminuted fractures, orthopedic reduction and reduction, certain injuries of the pelvic ring and certain fractures of children, as well as humerus, tibia, treatment measures for nonunion of femur and other bones and trauma infection.
The design of External Fixator for Elbow has hinge structure for easy assembling and fit to anatomy, over-articulation external fixation for finely adjusting the nut, and the pin clamp with variable angle. In the meantime, it could be used for elbow open fractures, elbow anchylosis, comminuted intra-articular fractures, peri-elbow joint fractures as well as fractures or dislocations of the mentioned positions with ligament instability.
The design of External Fixator for Pelvis is less damaged, easily operational, adjustable. In the meantime, it can be performed in the emergency room or operating room, effectively reduce the volume of pelvic to control the bleeding, which is beneficial to the further diagnosis and treatment, and it can be used as a final treatment or temporary fixation. The system is used for pelvic fracture.
The design of 3D Computer-assisted External Fixator has 6 numbered rings with different colours for 6 support shafts, special fiation holes for support shaft. Through computer software, any deformity can be simulated and pre-built. In the meantime, it can be used for complex fracture, deformity correction, bone transportation and lengthening as well as arthrodesis.
The mini external fixator can be used in fingers and metacarpals fractures. The design of external fixator has light and flat structure which increases patient comfort and compliance, also it is easy for lengthening and deformity correction, simple operation tools.
The design of limb reconstruction and lengthening system is easy to install and carry, and it has anatomical design to increase patient comfort and compliance. Meanwhile, Limb Reconstruction and lengthening system can be used in bone defect, limb length discrepancy, segmental fracture, fractures with massive soft tissue defects , and Limb length discrepancy with angulation deformity,